| Art./Item |  Foro dischi (mm.) | Ø (mm.) |  thickness | Sett.Altezza | Sett. Q.tà | Sottotitolo |
|---|---|---|---|---|---|---|
| 54359 | 25,4 | 400 | 3 | 10 | 27 | cemento, cemento armato |
| 54358 | 25,4 | 350 | 3 | 10 | 23 | cemento, cemento armato |
| 54357 | 25,4 | 300 | 3 | 10 | 27 | cemento,cemento armato |
Zenith 3D is the new disc that is made from 3D Evolution technology, has exceeded limits set by old technologies. The diamond grains can now be set in various configurations, equidistant and are perfectly aligned on each layer of the diamond sector within the binder.
Thanks to this new technology, when a diamond layer wears down a new layer with the same aligned grain quantity is equally exposed out of the binder.
Equal consumption of Zenith 3D allows the machines upon which the diamond tools are mounted to keep the number of motor revolutions constant and never operates under charge. The tool is constantly sharpened, maintaining maximum stability and eliminates almost all load and vibration excess from the operator, especially in manual applications.
The vents on the core allow the tool not to overheat, increasing its durability and maintaining constant cutting speeds. The reinforced centre gives it maximum stability.
Materials type and Quality standard
- Brick
- Concrete
- Reinforced concrete
- Abrasive/Refractory
- Granite/Stone
Platinum
Cutting indications
Dry cut
Humid cut
