| Art./Item | Size |
|---|---|
| 44560 | 40 |
| 44561 | 41 |
| 44562 | 42 |
| 44563 | 43 |
| 44564 | 44 |
| 44565 | 45 |
| 44566 | 46 |
| 44567 | 47 |
Technology
Light safety toe cap
Particularly lightweight composite toe cap that provides high thermal insulation and total foot protection in the event of objects falling from above, from impacts of up to 200J, which is equivalent to the energy caused by a stone of 10kg from a height of 2m.
High Flex Perforation proof midsole
Anti-puncture midsole made of high-strength and highly flexible synthetic polymer fiber. It contributes to high thermal insulation of the shoe. Extremely light and comfortable, the high flex midsole guarantees total protection of the foot from the risk of wounds, cuts and punctures.
PU-Rubber sole
Anti Skid System rubber sole, maximum stability even on the most slippery surfaces.
Performance
A - Antistatic Shoe
Work shoes with antistatic properties that allow the controlled passage of low-voltage currents, dissipating the electrostatic charges accumulated by the operator during work activities and reducing the risk of ignition in environments with the presence of flammable or explosive substances.
FO - Resistance of the sole to hydrocarbons
Work shoes equipped with soles designed to resist prolonged contact with oily substances and hydrocarbons without undergoing structural alterations. The laboratory test involves immersing the compound in Trimethylpentane, verifying that the swelling and increase in volume of the sole do not exceed 12%, thus ensuring the stability and durability of the shoe over time. This requirement is mandatory for work footwear according to the 2011 standard, while it becomes additional and optional for the 2022 standard.
WR - Waterproof shoe
Safety shoes totally waterproof thanks to upper, seams and joints tested to prevent the entry of liquids. The waterproofness of the entire shoe is tested by placing it in a water tank and subjecting it to a dynamic flexion or mechanical walking test.
HRO – Heat-resistant sole for contact
Soles that are resistant to heat contact. The test involves contact with a hot surface of 300°C for 60 seconds without visible damages.
CI - Cold insulation
Work shoes designed for outdoor use with exposure to atmospheric agents at low temperatures. The entire footwear is subjected to a specific test at −17 °C, verifying that the drop in internal temperature is not lower than the required standards, thus ensuring perfect maintenance of the foot's thermal comfort.