Art./Item | Size |
---|---|
27717 | 10 |
27716 | 09 |
Tiler Top Winter thermal work gloves are ideal for maintenance work in cold environments or during the winter season. The blue latex coating with microporous surface ensures a good grip for excellent grip, while the inner padding of the work gloves provides protection from the cold.
Kapriol's thermal work gloves conform to EN 388:2016 and EN 511:2006, ensuring high tear resistance and reliable protection in cold environments.
TECHNICAL SPECIFICATIONS
- inner padding
- blue latex coating
- microporous surface
- high tear resistance
- in accordance with EN388 test (2242X) - EN 511 (X21)
MATERIAL
- Fabric: nylon
- Coating: latex
- Filling: acrylic
PROTECTION AGAINST MECHANICAL RISKS - EN 388:2016 STANDARD
Abrasion resistance | 2 |
Cut resistance (Coup test) | 2 |
Tear resistance | 4 |
Perforation resistance | 2 |
Cut resistance (ISO 13997) | X |
PROTECTION AGAINST THE COLD - EN 511:2006 STANDARD
Convective cold | X |
Contact cold | 2 |
Water impermeability | 1 |
Performance

Cold proof
EN 388:2016 STANDARD
Cut test
Meaning of the marking on the gloves
EN 388:2016 standard classifies protective gloves according to their resistance against mechanical risks. The resistance against ABRASION - CUT - TEAR - PERFORATION must appear in the pictogram relating to the standard. The revision of the previous standard (EN 388:2003) has made changes to the test procedures, especially for the CUT test, including an additional test.
Test performed to provide an indication about the cut protection. The test is performed using a circular blade that moves on the surface of the gloves with a 5 newton pressure (Coup Test). The evaluation, from 1 to 5, is measured by calculating the number of cycles until the moment in which the blade penetrates the fabric. For high cut resistance gloves (Coup Test 4 o 5) an additional test (EN ISO 13997) is carried out with a straight blade from which the force required to penetrate the fabric is detected. The value is expressed from A to F (F is the highest value). If the ISO 13997 test is performed it is not necessary to declare the value of the Coup Test which is expressed with X.
