20 m retractable type device

Wire rope retractable type fall arrester

*
*
Find the Kapriol dealer closest to you
Show article variant table
Art./ItemLength (mt)Misura (m.)
279182020

Retractable fall arrest device with galvanised wire rope with a length of 10-20 metres and a maximum load capacity of 140 kg. This fall arrest device can be used on flat or inclined surfaces for restraint and positioning purposes only, where there is no possibility of a fall.

The wire retractable type fall arrester guarantees a breaking load of 15 kN and is not certified for horizontal use, in the event of a fall the cable could break on sharp edges.

 

TECHNICAL SPECIFICATIONS 

  • Protective casing 
  • Breaking load 15 kN
  • Maximum load capacity 140 kg
  • Rope diameter 4 mm and length 10-20 m
  • Standard EN 360


MATERIAL

  • Rope: galvanised metal
  • Casing: shockproof ABS

Maintenance and storage of PPE

PPE periodic checks and inspections

Correct and regular maintenance helps prevent premature ageing of PPE. For this reason, users are recommended to carefully respect all indications found in the user and maintenance manual that accompanies each PPE and to follow the simple storage and preservation rules:

  • Keep away from sunlight and UV rays as these are the primary cause of ageing of PPE textile fibers
  • Keep PPE away from direct heat sources as the synthetic textile fibers used to make harnesses, lanyards, and energy absorption systems have a very low melting temperature
  • PPE must be stored in cool and dry areas, as humidity generates mold harmful to textile fibers and corrosive on metal parts
  • A periodic cleaning operation is essential to ensure a good durability of the PPE
  • A washing with lukewarm water eliminates surface dirt and that present inside the textile fibers

The current legislation requires that each equipment must be subjected to periodic inspections:

  • Before, during and after use, the user must check the PPE conditions and integrity through a visual inspection after each use
  • At least every 12 months, PPE must be subjected to mandatory periodic checks and inspections by competent personnel authorized by the manufacturing company

Each PPE is accompanied by a manual and identity card that must be kept for the entire use duration of the product and filled in with the periodic inspections data.

Recommended use

Confined spaces

Restraint (on fixed surface)

Customers who bought this item also bought

Fluorescent spray can Fluorescent spray paint

Hammer stapler Manual fixing machine

Warning tape White and red tape