Gloves Dots

Show article variant table

Art./Item	Size
28032	09
28033	10
27722	08

Work gloves with non-slip grip ideal for maintenance work. The spongy nitrile coating together with the non-slip dots on the palm and fingers ensure a firm and secure grip while working.

Made of nylon, the non-slip work gloves offer comfort, provide breathability and high abrasion resistance; in addition, touchscreen compatibility adds convenience to the work glove.

TECHNICAL SPECIFICATIONS

spongy coating
non-slip dots on palm and fingers
high resistance to abrasion
excellent comfort and breathability
touchscreen
in accordance with EN388 - test 4121X

MATERIAL

Fabric: nylon
Coating: nitrile

PROTECTION AGAINST MECHANICAL RISKS - EN 388:2016

Abrasion resistance	4
Cut resistance (Coup test)	1
Tear resistance	2
Perforation resistance	1
Cut resistance (ISO 13997)	X

Performance

Touchscreen

EN 388:2016 STANDARD

Cut test

Meaning of the marking on the gloves

EN 388:2016 standard classifies protective gloves according to their resistance against mechanical risks. The resistance against ABRASION - CUT - TEAR - PERFORATION must appear in the pictogram relating to the standard. The revision of the previous standard (EN 388:2003) has made changes to the test procedures, especially for the CUT test, including an additional test.

Test performed to provide an indication about the cut protection. The test is performed using a circular blade that moves on the surface of the gloves with a 5 newton pressure (Coup Test). The evaluation, from 1 to 5, is measured by calculating the number of cycles until the moment in which the blade penetrates the fabric. For high cut resistance gloves (Coup Test 4 o 5) an additional test (EN ISO 13997) is carried out with a straight blade from which the force required to penetrate the fabric is detected. The value is expressed from A to F (F is the highest value). If the ISO 13997 test is performed it is not necessary to declare the value of the Coup Test which is expressed with X.