| Art./Item | Size |
|---|---|
| 28059 | 09 |
| 28060 | 10 |
Thermal work gloves made of nylon with blue latex coating and additional non-slip coating on palm and fingers to ensure better grip in the presence of liquids. Equipped with an elasticised nylon cuff for maximum freedom of movement, the Tiler Top winter work gloves are suitable for maintenance work of various kinds during the winter season.
Tiler Top work gloves comply with EN 388 (2131X) and guarantee resistance to abrasion, cuts, tears and punctures, while compliance with EN 511 (X21) ensures the glove's insulating capacity against the cold.
TECHNICAL SPECIFICATIONS
- blue latex coating
- additional non-slip coating on palm and fingers
- elasticated cuff
- in compliance with EN 388 (2131X) - EN 511 (X21)
MATERIAL
- Fabric: nylon
- Coating: latex
- Padding: acrylic
PROTECTION AGAINST MECHANICAL RISKS - EN 388:2016
| Abrasion resistance | 2 |
| Cut resistance (Coup test) | 1 |
| Tear resistance | 3 |
| Perforation resistance | 1 |
| Cut resistance (ISO 13997) | X |
EN 388:2016 STANDARD
Cut test
Meaning of the marking on the gloves
EN 388:2016 standard classifies protective gloves according to their resistance against mechanical risks. The resistance against ABRASION - CUT - TEAR - PERFORATION must appear in the pictogram relating to the standard. The revision of the previous standard (EN 388:2003) has made changes to the test procedures, especially for the CUT test, including an additional test.
Test performed to provide an indication about the cut protection. The test is performed using a circular blade that moves on the surface of the gloves with a 5 newton pressure (Coup Test). The evaluation, from 1 to 5, is measured by calculating the number of cycles until the moment in which the blade penetrates the fabric. For high cut resistance gloves (Coup Test 4 o 5) an additional test (EN ISO 13997) is carried out with a straight blade from which the force required to penetrate the fabric is detected. The value is expressed from A to F (F is the highest value). If the ISO 13997 test is performed it is not necessary to declare the value of the Coup Test which is expressed with X.
Thin Touch Gloves Gloves for maintenance work
Easy Grip Gloves Work gloves
Skin Gloves Professional work gloves
Basic Touch Gloves Work gloves with grip
You may also be interested in:
Related products
Basic Touch Gloves Work gloves with grip
Supergrip gloves Non-slip gloves
Gloves Dots Gloves with non-slip dots
