Guanti Power Grip

Show article variant table

Art./Item	Color	Size
28011	BLU	09
28012	BLU	10
28013	GIALLO	09
28014	GIALLO	10
28016	ARANCIO	09
28017	ARANCIO	10

Polyester work gloves with latex coating and special non-slip design on the palm that gives the glove an excellent grip.

The non-slip Power Grip work gloves provide high tactile sensitivity, making them ideal for precision work.

TECHNICAL SPECIFICATIONS

non-slip design on the palm
high tactile sensitivity
in accordance with EN388 - test 2121X

MATERIAL

Fabric: polyester
Coating: latex

PROTECTION AGAINST MECHANICAL RISKS - EN 388:2016

Abrasion resistance	2
Cut resistance (Coup test)	1
Tear resistance	2
Perforation resistance	1
Cut resistance (ISO 13997)	X

DECLARATION OF CONFORMITY

POWER GRIP

EN 388:2016 STANDARD

Cut test

Meaning of the marking on the gloves

EN 388:2016 standard classifies protective gloves according to their resistance against mechanical risks. The resistance against ABRASION - CUT - TEAR - PERFORATION must appear in the pictogram relating to the standard. The revision of the previous standard (EN 388:2003) has made changes to the test procedures, especially for the CUT test, including an additional test.

Test performed to provide an indication about the cut protection. The test is performed using a circular blade that moves on the surface of the gloves with a 5 newton pressure (Coup Test). The evaluation, from 1 to 5, is measured by calculating the number of cycles until the moment in which the blade penetrates the fabric. For high cut resistance gloves (Coup Test 4 o 5) an additional test (EN ISO 13997) is carried out with a straight blade from which the force required to penetrate the fabric is detected. The value is expressed from A to F (F is the highest value). If the ISO 13997 test is performed it is not necessary to declare the value of the Coup Test which is expressed with X.