Guanti Supergrip

Show article variant table

Art./Item	Size	Pcs
28154	10	1
28158	09	1
89319	09	3
89320	10	3

Non-slip gloves with a thick coating and a special non-slip knurling on the palm, making them ideal for carrying out a variety of maintenance tasks. The tubular knit cuff of the Supergrip work gloves guarantees optimal comfort during use.

Supergrip non-slip gloves protect against mechanical risks according to EN388 and guarantee high tear resistance.

TECHNICAL SPECIFICATIONS

thick coating and corrugated finish
non-slip knurling on palm
tubular knit cuff
in compliance with EN388 standard - test 2142X

MATERIAL

Fabric: polyester
Coating: latex

PROTECTION AGAINST MECHANICAL RISKS - EN 388:2016

Abrasion resistance	2
Cut resistance (Coup test)	1
Tear resistance	4
Perforation resistance	2
TDM cut resistance	X

EN 388:2016 STANDARD

Cut test

Meaning of the marking on the gloves

EN 388:2016 standard classifies protective gloves according to their resistance against mechanical risks. The resistance against ABRASION - CUT - TEAR - PERFORATION must appear in the pictogram relating to the standard. The revision of the previous standard (EN 388:2003) has made changes to the test procedures, especially for the CUT test, including an additional test.

Test performed to provide an indication about the cut protection. The test is performed using a circular blade that moves on the surface of the gloves with a 5 newton pressure (Coup Test). The evaluation, from 1 to 5, is measured by calculating the number of cycles until the moment in which the blade penetrates the fabric. For high cut resistance gloves (Coup Test 4 o 5) an additional test (EN ISO 13997) is carried out with a straight blade from which the force required to penetrate the fabric is detected. The value is expressed from A to F (F is the highest value). If the ISO 13997 test is performed it is not necessary to declare the value of the Coup Test which is expressed with X.