Art./Item | Comp. |
---|---|
99127 | 27996 n.1 |
Complete fall protection kit for antenna technicians and chimney sweepers, allowing work on inclined planes with a maximum radius of action of 2 m, in total safety and guaranteeing freedom of movement.
The fall protection kit for antenna technicians includes a protective helmet, a harness, a retractable device with energy dissipator, anchorage webbing, an oval carabiner, and comes complete with a practical equipment backpack.
TECHNICAL SPECIFICATIONS
- Airkap protective helmet with ABS shell, chin strap and emergency release system
- Beta 3 harness with adjustable leg loops and braces, leg strap, back fall arrest ring (A) and two front fall arrest rings (A), which can also be used individually
- 2 m retractable device with polyester webbing, energy absorber applied to the webbing and anchorage system with swivel ring
- 120 cm polyamide anchor webbing with steel attachment rings, guarantees a breaking strength of up to 30 kN
- Steel oval ring carabiner with 25 kN breaking strength
- Black-orange equipment rucksack
Maintenance and storage of PPE
Critical factors
PPE periodic checks and inspections
Product identification
Working life
Correct and regular maintenance helps prevent premature ageing of PPE. For this reason, users are recommended to carefully respect all indications found in the user and maintenance manual that accompanies each PPE and to follow the simple storage and preservation rules:
- Keep away from sunlight and UV rays as these are the primary cause of ageing of PPE textile fibers
- Keep PPE away from direct heat sources as the synthetic textile fibers used to make harnesses, lanyards, and energy absorption systems have a very low melting temperature
- PPE must be stored in cool and dry areas, as humidity generates mold harmful to textile fibers and corrosive on metal parts
- A periodic cleaning operation is essential to ensure a good durability of the PPE
- A washing with lukewarm water eliminates surface dirt and that present inside the textile fibers

The current legislation requires that each equipment must be subjected to periodic inspections:
- Before, during and after use, the user must check the PPE conditions and integrity through a visual inspection after each use
- At least every 12 months, PPE must be subjected to mandatory periodic checks and inspections by competent personnel authorized by the manufacturing company
Each PPE is accompanied by a manual and identity card that must be kept for the entire use duration of the product and filled in with the periodic inspections data.

Recommended use

Positioning (on upright)

Confined spaces

Restraint (on platform)
Possible use
