Inclined surface and vertical work kit

Show article variant table

Art./Item	Comp.
99125	27996 n.1

The fall protection kit for inclined planes allows work to be carried out vertically, up ladders and on metal structures in complete safety, guaranteeing free movement during work operations.

This fall protection kit is suitable for eaves positioning work, wide pitch roof repairs and double rope work.

TECHNICAL SPECIFICATIONS

Airkap protective helmet with ABS shell, chin strap and emergency release
Beta 3 harness with adjustable leg and shoulder straps, leg strap, dorsal fall arrest ring (A) and two front fall arrest rings (A), which can also be used individually
Easy fall arrest device on 11 mm diameter rope - length 10 m, with two ring nut connectors for attachment to the harness and anchorage point
120 cm polyamide anchoring webbing, with steel attachment rings with 30 kN breaking strength
Equipment backpack

Maintenance and storage of PPE

Critical factors

PPE periodic checks and inspections

Product identification

Working life

Correct and regular maintenance helps prevent premature ageing of PPE. For this reason, users are recommended to carefully respect all indications found in the user and maintenance manual that accompanies each PPE and to follow the simple storage and preservation rules:

Keep away from sunlight and UV rays as these are the primary cause of ageing of PPE textile fibers
Keep PPE away from direct heat sources as the synthetic textile fibers used to make harnesses, lanyards, and energy absorption systems have a very low melting temperature
PPE must be stored in cool and dry areas, as humidity generates mold harmful to textile fibers and corrosive on metal parts
A periodic cleaning operation is essential to ensure a good durability of the PPE
A washing with lukewarm water eliminates surface dirt and that present inside the textile fibers

The current legislation requires that each equipment must be subjected to periodic inspections:

Before, during and after use, the user must check the PPE conditions and integrity through a visual inspection after each use
At least every 12 months, PPE must be subjected to mandatory periodic checks and inspections by competent personnel authorized by the manufacturing company

Each PPE is accompanied by a manual and identity card that must be kept for the entire use duration of the product and filled in with the periodic inspections data.